Sprache

Openmtbmap.org runs on webservers sponsored by www.domainbox.de domainbox-small

email feed

Send maps to GPS with Mapsource

For everyone knowing how to use Mapsource

There are some pecularities with the openmtbmap.org to pay attention to: It is not advisable to simply select maps by left clicking if you have contourlines installed. If you have, then you need to select maps by dragging the selection tool, else you will either send maps without contourlines, or contourlines only to your GPS. If you have not installed contourlines, you can do as you like.

 

 

For Newcomers:

Mapsource is the easiest tool to send maps to your GPS. There are some pecularities with the openmtbmap.org to pay attention to:

0. Select the openmtbmap in the drop-down menu if you have not done so already. The drop down menu is to the left of the "+" and "-" button used to zoom in/out. It is only shown if more than one map is installed.

1. Zoom out (best to 30 – 70km on details "Medium" ). You can directly click onto the zoom using the drop-down menu.

2. Select the mapselect tool:

mapsource1

 

3. Now click on the map – and while holding the left mouse button – drag it over the area you wan't to tranfer to your GPS. In the right pane under Maps you should see the selected maps now: 

 

 

 

 

 

 

 

 

 

 

If you want to transfer maptiles from several maps, just select another map on the map dropdown menu – untill all maps you want to have on your GPS are selected (remember, maps previously on your GPS in /garmin/gmapsupp.img (basemaps are saved under a different name) will be overwritten, so include maps previously sent to your GPS too if you want to continue working with them). If the firmware of your GPS is up-to-date most GPS can handle up to 4096MB of maps. Not you can also click instead of drag with the mapselect tool. However if you have installed contourlines, clicking will leave you with either the contourlines only, or the maps only. So if in doubt, drag with left mouse button, and don't simply click/tick to select maps.

 

4. Make sure that if you wan't to have autorouting enabled, that this button is ticked:

 mapsource3

 

5. Now choose any other mapsets that you wan't to transfer to your GPS (different map in step 0). Notice that by sending new maps to your GPS all old maps (except the basemap, or the Topographic extended map of Europe for some Colorado/Oregon that came with your unit)  will be deleted. I think actually that you can't overwrite maps on internal memory (important for Nuvi) – but I have no Nuvi so I can't test this. You can preview which maps will be deleted by connecting your GPS to your computer and renaming the gmapsupp.img on the SD card to gmapsupp.img.bak and then restart your GPS to see which maps don't show up anymore. If you are unsure best make a backup of all the data on your GPS. 6. In the top Menu click on Transfer –> "Send to Device". It's fastest to send the maps to an SD/microSD card in a card reader because most Garmin units only support USB 1.1 and not USB 2.0 High Speed – so sending maps directly to the unit connected via USB will take much longer than to your data card. I recommend to send maps to external data cards and not GPS internal memory.

mapsource4

 

Spend a token to make the maps even better - Unterstuetz openmtbmap - fuer noch bessere Karten.

95 comments to Send maps to GPS with Mapsource

1 2 3
1 2 3

Leave a Reply

 

 

 

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong> <font color="" face="" size=""> <span style="">